Snow Ball #2 - 72 Swinger

got the passengers side finished

what I should have done was
paint drivers/pass sides while tacked in place, leaving the places to be welded bare.
like i did the drivers side

Then remove, final weld the out riggers and tabs.

the pass side I welded it then painted,
that made more work to prep the welds on the car.





the carriage bolts in this pic are for mocking up> will get proper bolts with poly lock on final assemble





a little wire brushing the welds,
touch up the paint

re attached the emergency brake cable mount
the actual fuel line will get sleeves over it before putting the end connector on
then slid into place