[SOLD] 4 Speed shifter handle

-
Status
Not open for further replies.
6

64cudaV8

Well-Known Member
Joined
Dec 8, 2014
Messages
408
Reaction score
21
Location
TX
Rating - 100%
2   0   0
Contact seller
I have a 4 speed 64 barracuda. I am putting a later model floor console in it. I need the bent inward shifter handle to locate the shifter in the right spot. Anyone have one with the chrome in great shape. let me know. maybe the boot as well?
 
It's not bent. It's an L Shaped lower piece with the round stock welded to it and then poking through the hole.
I made one once using a long, round truck shifter. Heated and bent it into a pretty severe S shape and it poked out right where it needed to be. Only problem going that route, is that you'd have to have it chromed if you wanted it to be pretty.
 
L shaped is what I meant. I think the later 60's barracudas had them. Not sure, ebay is crazy on the price of one.
 
A-Body Console shifters came in 2 versions, Inland and Hurst. Both handles are very rare and fetch a tidy sum. I do believe Brewers Performance reproduces the Hurst type console shifter handle but they are a bit pricy also. Check their web site.

Russ
 
Extremely difficult piece to find and if you do they are EXPENSIVE. Good luck. I have an Inland and have been looking for a Hurst with no luck so far for 2 years. There's one on Ebay now for stupid money. $699 for a used unit.
 
Have you checked the price for 67 chevelle with console?
 
I actually found a place that sells just the shifter handles. Its 99$ for the 4" ofset handle I need.
 
Status
Not open for further replies.
-

Back
Top