AlV
Crabs in a barrel
I just pressed mine in and out.
This set up came off of a 68 barracuda... looked all original.
This set up came off of a 68 barracuda... looked all original.
KH Hub removal ?
- Thread starter 1967formulaS
- Start date
-
1967formulaS
Well-Known Member
Cool, where did you get wheel studs from?
If i needed a lot of studs, i would order them from Rock Auto, along with the other rebuilding parts that i needed.
Locally, i would get them from time to time, from any of the local parts stores that carry the Raybestos line of brake parts.
Raybestos #7202B
NAPA has them, 641-3148 but that's a number that i pulled out of my files in an old computer of mine. Should still be current though, to check, or cross reference to Dorman, or other companys.
Found a Dorman number for you too. 610-130
Locally, i would get them from time to time, from any of the local parts stores that carry the Raybestos line of brake parts.
Raybestos #7202B
NAPA has them, 641-3148 but that's a number that i pulled out of my files in an old computer of mine. Should still be current though, to check, or cross reference to Dorman, or other companys.
Found a Dorman number for you too. 610-130
1967formulaS
Well-Known Member
Cool, thanks. Comes out at $79.30 for 10 shipped to Australia.
Proves my point. Thanks. Carry on
............Dam, I changed a few years ago and don't remember if they were like that or not, maybe on different years ?.......the 1s I did were 70-72.........kim......
Thanks for part numbers here, I just broke one on Dads cuda...:violent1:
-
