Any A-518 transmission Darts in here ?

BigBlockMopar said
You can add a bit more rigidity by welding the floorboards to the crossmember on the front and the rear over the entire width of the body.

thanks, i agree.

the pics don't show the spot welds every well

What i was doing was applied pressure to the floor,
to get a snug fit/tight spot weld.
first mig welded from the bottom, on the frame rails,
then on top could then see where the frame really was.
then spot welded between those areas.
then a combination of spot welds and mig welds around the perimeter