[SOLD] 8 3/4 axles from truck/van/ or C-body to use for narrowed A-body project

-
Status
Not open for further replies.
pitbill

pitbill

Well-Known Member
Joined
Apr 22, 2014
Messages
159
Reaction score
24
Location
Bluefield, WV
Rating - 100%
6   0   0
Contact seller
Looking for axle shafts from 8 3/4 out of a truck, van, or C-body that I can cut and respline for a narrowed A-body Dart project. If you have anything sitting around let me know.

Will be going a different direction and having new axles made for my 8.25 rear project. Thanks to all who replied.
 
I have 8 3/4 axles and 8 3/4 ends I could sell you. Let me dig them out of the garage and take pics.
 
..............I always want to avoid resplined axles as I've had a couple break and a couple twist.........when they break it usually costs a tranny/.............kim.........
 
pitbill said:
Looking for axle shafts from 8 3/4 out of a truck, van, or C-body that I can cut and respline for a narrowed A-body Dart project. If you have anything sitting around let me know.
Click to expand...
if you do this make sure there is enough "beef" at the end of the axle to be re-splined. not all of the axles you listed are the same. some taper down at the end. Its a hit and miss deal trying to find the correct ones
 
Will be going a different direction with my 8.25 project and will be having new axles made instead of resplining 8 3/4's. Thanks to all who replied and for the advice.
 
Status
Not open for further replies.
-

Back
Top