No spark- what am I missing?

I was looking at the wrong scale for dwell. It is 38, which is just shy of the 40-45 spec, and since the gap is .020, I think it's probably close enough.

Since the last post I've verified 12v to the points and good ground to the other side.

The condenser is brand new from the box and name brand (wells?) but it has been on my shelf for about 20 years.

I did not know it would run without that. I'll give that a try.

I also have a few more I can try, but I chose that one because it was the only one still in a box.

I also eyeballed that shaft play. Not much if any side to side but a fair amount up and down.
Checked the 67 318 and it's about the same.