champion cc374 rad

modart440 said

thanks for the info. I measured from the bottom side of my hood to the top of the lower rad support and it measures 23 1/2 .There was another post somewhere that the dimensions on the cc374 rad have now been changed and the overall height is now 23 5/8.The rad you have might be the older version that measured 22 1/2 overall. Any chance you could measure to confirm?
thanks

Click to expand...

Took the measurement, the dual electric fans make it a little hard to get a good straight measurement but I came up with 22-1/2" from the bottom to the top of the tank, and 23-1/2" from the bottom to the top of the radiator cap.

Also, I noticed that my tubular lower radiator support brace sits completely behind the radiator. It's close, but the corners of my radiator wouldn't clear the tubular brace if it were farther forward, like if it was used to replace the stock radiator support. You could do that, but the tubular support would have to sit lower than mine does. I'm pretty sure I trimmed mine up a bit because I was only worried about it clearing the radiator where it sits on my car.