1965 Dodge Dart Charger

The rear armrest pad looked like a walk in a park. Make a hole and mount the ash tray!

I started out with measuring the area and did a copy of it in paper.Then I took a pen and did the markings in the top surface. The foam was very hard. I had to go into the kitchen when Gunilla was out with the dog to get a super sharp knife to start making small sticks into the foam until I had gone all around. After repeating that procedure for 8-10 times it had start to loosen. Next step was to get out that marked area. It showed up that att two small areas was the foam all the way through. That meant that I had to carefully bend up that area. The resulted in a knife in my hand!:banghead:

Once when I was a little kid and was working in my grandpas shop he told me that what ever you do, never point a blade on the knife towards you. So I did!!:banghead:

Well, at the end I got up that marked area and next step will be to drill holes in the corner and start to drill out the metal that goes inside the armrest pad. This will be way more time consuming then I thought!