Snow Ball #2 - 72 Swinger

after plotting the spring position
was going to plate the upper shackle mount

Then decided to add the forward position,
because we have 2 positions for the front spring eye,
and 2 for the Caltrac bar

plus 4 positions for the lower shackle
(Stock, plus 1 to plus 3)

If we were to use the plus 2 -3, then the upper mount would need to be forward
So, might as do it, now..
(pic is with no weight,on the spring)







Will weld them in
once determine the shackle mount, left to right > place in the frame.