1st autocross run.

Thanks for the replies! If I remember correctly the front bar is 1". The rear springs are matched. I already had the springs, and the thought after speaking to a few people was rather than buy springs and a rear sway bar, control the rear roll with spring rate. Which seemed to work quite well just had some side to side movement like you mentioned was probably due to the arch. I raised the nose about an inch from that picture. Here's my idea for the rear. Let me here some feedback.

Rather than dumping a bunch of money into springs and bars. (When I eventually want to do a HKD triangulated 4bar ;). Use afco spring sliders to get the rear down, and also help w/ the side to side movement, fab a panhard bar, and maybe put a 1" lowering block in it.