'69 Fargo W100
Got some more done including putting the carb on, air cleaner, fuel pump, new rubber fuel lines, rad hoses, etc.
I also took the passenger door off to check out the door hinges because it sagged so bad the door couldn't even close. Turns out the previous owner melted the hinge and pin with a torch, and put it back in the truck. I welded a plate onto each side of the hinge, drilled a hole into each, installed bushings and a new pin, and put it all back together. The door closes great now. I also took the latch apart and cleaned it up, it was seized and the lock button and key lock wouldn't work, but it all works great now.
Got some more done including putting the carb on, air cleaner, fuel pump, new rubber fuel lines, rad hoses, etc.
I also took the passenger door off to check out the door hinges because it sagged so bad the door couldn't even close. Turns out the previous owner melted the hinge and pin with a torch, and put it back in the truck. I welded a plate onto each side of the hinge, drilled a hole into each, installed bushings and a new pin, and put it all back together. The door closes great now. I also took the latch apart and cleaned it up, it was seized and the lock button and key lock wouldn't work, but it all works great now.
