Carter AFB 4120S

they are easy to do. if you have a local mopar club check with them. or maybe an internet howto. some hints. 1. clean work table. 2. tubing wrenchs. no rounded fittings for us. and NO hose for fuel line. 3. some small cans to hold small parts. 4. separate parts by type. some parts can go into the soup, some cant. 5. do NOT remove jets if you dont have to, and do NOT force them. if they are stuck there is a trick to get them out. and with some one to guide you, you should be fine. 6. and in middle at the front and back is a screw. of different lengths front to back. DO be sure the screws go back in where they came from. the screws on the outer edges are all the same.