Will these 18x9 wheels fit my 64 cuda??

Hey FABO!

Got a question before I buy these wheels.

64 barracuda
Stockish suspension
73-76 front disc brake conversion
-73 dart UCA
-73 dart spindles
-Stock LCA
-PST 1.08 Torsion bars
-Addco 1 1/8 sway bar
-73 dart PST front end bushing kit
Drilled and slotted rotors with 5x4.5 bolt pattern

Ford 8.8 rear end, centered diff


I would like to buy the XXR 526 wheels for my cuda. Im going to start with buying the fronts first as im not done building the rear end yet, but I would like to get the front on wheels vs jack stands.

As for quarter panel and fender clearance im not to concerned about it, as I have every intention and plan on cutting the wheel wells and flaring them as required to fit these wider wheels.

My concern is mainly on frame rail rub, and UCA clearance.

I did the best I could to research this subject on the forum and online at other forums. From what I found is people where putting this setup on 67+ with either no issue, or simply requiring spacers.

Im not sure as to how well the early A body wheel fitment specs are to the 67+ A bodies, Then the fact that I did the 73-76 disc brake conversion, also confuses me on the answer.

Do I go with early abody specs? or with 73+ specs? Or are the early A bodies and 67+ wheels specs the same??

So im hoping someone here can shed some light on this subject. I figured it wouldnt hurt to order them, test fit them, and send them right back if it didnt work, or could not be made to work.

Im fine with doing some mods but what I dont want to do is buy tubular control arms, as I saw on some threads where people where using tubular UCA for wheel clearance.

I dont really want to go 17s 16s 15s 14s.

Would really prefer to go 18" all around.

Wheel specs

XXR 526
18x9 +35mm (also have +25mm option) 6.38 backspacing

link to wheels

http://www.nlmotoring.com/XXR-526-Wheels-18x9-Chromium-Black-p/52689142n.htm?CartID=1

Thanks!!