Let's get this slant turbo project started. 71 Dart

Again, this is NOT mine. I don't think I would Turbo this one.

http://www.ebay.com/itm/251841463124?item=251841463124&viewitem=&vxp=mtr#ht_412wt_1295

"Aluminium 225 Slant Six engine block with main caps, bolts & main seal caps.
The block has been cleaned, inspected & has some weld & epoxy corrosion repairs.
This is Chrysler die casting number 28,677 out of approximately 50,000 units produced in the 1960 thru 62 time period.

The block had corroded a hole thru the back water jacket so we cleaned everything, installed a plug and welded it in, then covered both sides of the repaired area with high temperature epoxy.
A few other corrosion "pits" were cleaned, welded and / or epoxy repaired.

We also installed 1 inch of special block filler to even-out & strengthen the the floor of the water jacket, then did some oil passage deburring work.
The head gasket sealing area (top "deck) was re-machined flat. (resurfaced .010)

All the main caps, main seal caps & special bottom end bolts come with this block. These parts are all in great condition.
The bores are standard size, not cracked & show a slight wear ridge. (normal wear, no double ridges or deep scratches from broken ring(s)
We recommend buying new pistons and boring the cylinders but this block could also be "re-ringed".

All the special Aluminium Slant Six block parts are here so you can swap-over all the other needed parts from a common cast iron Slant Six.
We have a lot of experience with these special engines and can build the short block for you, (at an extra cost) or we can provide good used parts you may need to build this engine yourself. (Send us a message for details)

So here is your chance to get a "known good" Chrysler aluminium Slant Six engine block.
Due to the fragile nature and size of this item, local pick-up is preferred. ( no charge for local pick-up)
This engine block can be shipped UPS so see the shipping calculator for that cost. There is an extra "packaging charge" if we have to pack & ship this item."