Success ! !

well I'm going to have to hold off on video for a week or so. my neighbors are tolerant, but not over enthusiastic. I'll take it to the track next week and make a video or two their. I took some tin snips and opened up the oil filter. I did my first oil change today and nothing scary or anything. I had seen a few particles in the oil filter, but nothing larger or anything in the filter. Absolutely no oil leaks !:cheers: i was very skeptical about the mr gasket remote oil filter leaking, but turned out to be a good buy as the filter change was a breeze instead of a pain. Also i pulled a few plugs and they looked good (the 318 plugs were always very black-same carb setup) the much bigger cubes probably help along with the 100LL av-gas. I ran a feeler gage through several of the rockers a couple a hair tight-couple hair loose-couple perfect, but again nothing scary. I will re-ajust sooner than later. I will have to find some spacers for some of the side to side play in the 273 rockers. #6 intake can get farther off than I'm comfortable with. Nothing binding - mind you, just a little something to take up some of the gap and keep the rocker over the valve stem.