gear oil, reuse or not

cwatts said
Do you have to pull the axles to get the pig out ?

Snake said
Yup sure do.Just did it.I am removing old 1 leg and putting in an suregrip

Make sure you line up the splines in the suregrip unit, before you install it. And try not to turn anything when you do install it into the housing.

There are two sets of splines the axle needs to seat into on both sides, or the axle retainer won't quite contact the flange.

Also, pull the axles all the way out, don't let them hang in the rear, it can damage the inner seal and create a leak.

Same goes for putting the axles back in, use caution so you don't cut the seal with the splines on the axle.

DON'T forget to set your axle end play after you button it all up!!!!