Mopar 360 small block

You have to have the proper oil pan, I'm not sure what part number, someone else can fill that in... Or else the steering linkage may hit/interfere with the oil pan. The 273 oil pan will not work on a 360.

You may have to have the driveshaft shortened. If you haven't upgraded the axle, you may want to do that now so you only have to shorten and balance the driveshaft once. If you run a 7 1/4" axle (stock for most a bodies of that year) the 360 will break it..

The driver's side motor mount is different on the 360 from the 273, but the pass side mount will bolt right on...

If you want to use the original v-8 radiator from that barracuda, then I would strip the timing chain cover, and water pump from the 273 and put them on the 360. Keep the original 360 vibration damper for the 360 on it, but remark TDC for the marks on the 273. Then you can run the original style alternator, water pump, and radiator and shroud set-up. Use the fan from the 273.

Oh yeah, 360 is a good engine....