Bleeding brakes just 1 man

I usually gravity bleed. I haven't had any problems yet and been doing it for years. You remove the reservoir cap, start at the farthest wheel ( Right Rear) and move around the car in order from farthest to closest. Let the bleeder open until it starts dripping, close the bleeder, pump pedal several times, then open bleeder, you should see bubbles come out, Let it drip a little more, close bleeder and pump pedal, keep repeating until no bubbles come out. You can do this for every wheel, but I usually just do it for what ever circuit I have open. This may not be a good method for a "dry" system, it would take forever, this just works if you opened a system to replace a caliper, or wheel cylinder or hose etc.