Nice little read on Intakes

roccodart440 said

WINNERS


Edelbrock Performer rpm
Max hp: 610.2@6,{{{100}}} rpm
Max Torque: 590.2@4,000 rpm
Avg. hp 4,000-6,600 rpm: 555.9 hp
Avg. Tq 4,000-6,600 rpm: :555.4 lb-ft

Edelbrock Torker II
Max hp: 627.8@6,300 rpm
Max Torque: 593.3@4,{{{900}}} rpm
Avg. hp 4,000-6,600 rpm: 565 hp
Avg. Tq 4,000-6,600 rpm: 563.3 lb-ft

Click to expand...

This is what I found most interesting to me. When I posted a thread about the Torker II, pretty much everyone that responded, at least 90%, said to scrap it and get a RPM. Looks like these two are pretty close with the slight edge to the Torker II. At least on this particular engine. Granted my build is different and not as much compression, I'd venture to say that using either one of these two intakes isn't gonna be giving up much over the other. So I think I shall just stick with my cheap swap meet Torker II