Brake Light Switch or Turn Signal Switch?

jlhunsinger,

On your brake lights, you should have power to one side of the brake switch coming from your 20 amp fuse (pink wire I think). Then when you apply the brake pedal and close the switch contact it should feed the white wire going into your hazard flasher switch. Then finally feeding into the turn signal switch coming out on brown(right rear brake) and Dk. green (left rear brake)

You should have power coming from emergency flasher (pink wire at hazard flasher switch) and power from the signal flasher (red wire at turn signal switch )

Power feeds coming from the turn signal switch :
Right front -Tan
Left front- Lt. Green
Right rear - Brown
Left rear- Dk Green

You can check inputs/outputs from the column switches at the C1 19 plug . It is the 8 cavity plug at the base of the column. All the power inputs and outputs listed above , also includes a black wire feed for the horn.