push rod ?

first thanks in advance.

oiling ( hallow)straight through type)or non oiling ( hollow through with solid ends)


I have done some research on here and see that either will work fine with no real adverse effect on the valve train or oil pressures on pretty much normal daily street driven stock 1985 360.

I got this motor with the lifters still in the motor but rockers shaft assemblies and push rods just sitting in the valve covers ( that were off the motor) the shafts were marked front back/left/right ect but the push rods were just taped together with no real order marked out other than what side they came out of

So i have 4 of each ( oiling and non oiling) for each side and all of the rocker arms have holes but i did not check the lifters to see if there was any difference in the tops. i will do than now and hopefully some insight when i come back in the house in awhile

thanks again and im sure there is some info that will be wanted that i left out so please ask if you need anything else