360 budget build questions.

Thanks folks.

Ill start with the last question first as its the easyest to anwser.
The NAPA crank comes from a regrinder at .010-.010 I have serious doubts that my crank will grind out anything close to that. My buddys bringing over a nice mic today and I can realy start to see how far out it is.

The cam honestly is one that I saw listed on a bunch of 360 build threads. I have a problem picking cam shafts, I tend to pick on the far side of crazy and not be happy. This time I figured I just pick one that was common and not be let down. Im gonna have to do some more reading on lift and duration. (I do have tje factory 2 bbl cam, 2 accualy. one out of thos 360 w lifters and another running currently in my 318. I guess i could reuse the cam and put that money twards slugs?. I do want a nice lope at idle tho...)

I realy wanted to stay away from fancy slugs on thos build and do a true budget build but if you folks think its the way then dam, the wallet may cry..
I do not want to go crazy on machine work with this block or heads, valve train.

I will do some serious thinking on CR and some nice slugs.

The machine shop is an hour and fortey five min away and no friend to my wallet so any thing I can do to avoid "custom" machine work is a plus.



Thanks again for all the time and advice.