Ft Sway Bar bushing - R&R

There are two bolts that attach the bushing brackets to the K frame adapters. Pull those two bolts and just pry the brackets off the bushings and pull the bushings off the sway bar. When I installed mine I had the weight on the wheels which allowed me to push the bar up into position and I pushed the brackets as far as I could by hand on the bushing, then pulled them the rest of the way with the mount bolts. With the front end supported the way you have it the sway bar may be a little ticked and might want to kick down on you due to the lcas being full down so be careful. It may also make it harder to put the bar back up in position.