windage tray for the /6

Not sure if this will help you.
I made up my own and made it part of the sump.
In the process I made baffles for the sump, basically I continued the floor of the sump at the height of the front all the way to the back.
A hole is needed for the oil pick up to pass through.
The only problem is the sump needs to be twisted as it is raised to the block, sort of like screwing it.
This allows gasket replacement on the sump as it can be lowered a bit to do it but the motor has to come right out to drop off the sump.
No longer do I get that tacka tacka tacka just after coming to a sudden stop.
Thanks to the baffles.