Helping a buddy w/ 383 71 Dart, MM probs

Do yourself a favor and mock EVERYTHING UP........Including headers/torsions bars.....I'm building a 72 Dart for my Dad w/400/727 using TransDapt mounts and Hedman B body headers. The trouble I had was the biscuit mounts you get with the kit are too thin....I had some thicker ones laying around that solved alot of clearance issues.......** I really don't see how the thin ones would have worked at all ** I mounted the trans first and then checked the engine mounts....pass side was good but drivers side needed some work to line up.......In the end... I loosened up the trans mount and slid everything back as far as I could so the headers cleared the steering linkage. In doing this I had to modify the K frame mounts; Pass side slot had be widened/ Drivers side had to be redrilled and notched for oil pump clearance. I still had to massage the headers for the torsion bars and mini starter clearance. Keep in mind I did this for B body headers...Depending on the headers, you might be able to move the engine around and use the mounts without any trouble. Heddman B body headers and TransDapt mounts are less than $300 from Summit with free shipping....A day or two of trial and error and you got BB A body :cheers::cheers::cheers: