AlterKation Install

Day 2:

Lower bumpstops have to be removed. I did this with a 5/8" drill bit. You can also use a 1/2" rotobroach or other brand spot weld cutter. Be prepared to be covered in metal chips.. This part wasn't fun. Having the engine crane in the way made things even more fun.

We bolted the new K-frame in. The bolts per the instructions can go in hard. True...

Next was the engine mounts. The AlterKtion uses spool mounts. These were easy to bolt in on the drivers side. The passenger side was a bear. Precise jacking and prying required. It was a 2 man job. I almost thought it wasnt' going to work.

YOu can tell by the before and after fitment of the TTI headers the placement of the engine is much better now.

==============================