Pump to eddy performer fuel line

71 Swinger with stock AC

Im about to start the install the install of an Eddy intake and carb. I thought I had all parts needed but discovered I am missing the fuel line from pump to carb.
The stock hard line is still present and I'm guessing its the original fuel pump.
I have the Eddy single line kit 8134 that has banjo bolt and inline filter seen here:
http://www.summitracing.com/parts/edl-8134/overview/
It has a -6 AN inlet size.

Since Im guessing this is still the stock fuel pump and looking at the outlet size of 1/2 of any OEM replacements, Im in a dilema to find a suitable replacement line.
Following everyone's advice on here and trying to steer clear of any rubber lines.

I did find some small adapters for various sizes but it would be nice to find a braided or nylon line that has one end at -6 AN female and 1/2 Male.