AlterKation Install

Day 4: Column out, now here lies a few quirks. You have to find a tiny pin to remove the factory collar from the shaft. There are no pictures or description of said pin. My advice to you is to grind the paint off. Look at the top sides and you should see a tiny ring, maybe 3/16 diameter. Use a pin driver to get it out. Finding it is the hardest part.

Once off there is a large pin you'll need to knock out and save. It comes out really hard. A press would be ideal but you can do it in a vice with a hammer and driver.

Column is back in. You will now need to attach the universals and the linkage between the 2. That link will have to be cut. I'd measure but mine came out to 5" and I used a portaband to cut it.

Tonight is brakes.