Will 17x9.5 and 17x11 wheels fit a 73 duster?

Ok so I finally tried them on my duster after finally getting it back on its feet and on the concrete driveway.

I also used a wheel measuring tool and found that the
Front wheels are 17x10s
Rear wheels are 17x11.5s

-The fronts 17x10 with 6 1/8 inch backspace
These bolt right on no clearance issues except for slight contact with the tie rod end this is solved with a 3/8 inch spacer and have tons of room to the fender and the frame rails. Would definitely step up to a 255-40 to protect the wheel lip more

-The rears 17x11.5 with 6 7/8 inch backspace
These are not as easy and just touch the spring with my narrow SBP 7 1/4 with BBP adapters which are equal to about a 1 inch spacer.
This combo only needs another 1/2 to get off the spring.
To accomplish this I will be using an 8 3/4 out of a 69 charger which is 1 1/2 inches wider than an A Body 8 3/4. This will be the same as 3/4 inch wheel spacers on each side.
This rear end will be used in conjunction with a 3/4 inch spring relocation since I have to relocate the perches anyway and if needed a 1/4 inch wheel spacer should get these bad boys under with no rubbing at all.