What to do with this MP cam and lifter set

This cam could do well with;

10-1 iron head +1 more for aluminum heads
1.6 rockers would be my choice on top of Ported heads
1-3/4 headers
3000 min. Stall With another 500 for a teen.
3.91 gears min.
RPM intake
750 carb

This cam should have a RPM band of approx:
3000-6000+ with a rough idle. According to MP, it's duration at .050 is 288 X .850 = 244. The above is an approximation of how the cam should be handled if not a little more aggressively. It is a race cam so it should be handled as such. If you handle it right, it should deliver well.

I have used this (or the) flat track cam before.
Descriptions/specs are very similar to the banked track cam.
Idles like a lumber jack on crack withdrawals chopping for his next hit. (With OE AVS carb)

You could send it out for a regrind....
Or use it for its nasty idle rhythm