Removing Torsion Bars? and leaving them out?

Porsche 911's run front and rear torsion bars stock....thy handle like crap. :D

You need a system designed to carry the load of the upper shock mount or your going to fold in half when you turn. Air ride wasn't designed to be used on our cars without installing a different front end system like RMS or HD. If you want to get low just go slightly larger (Higher spring rate) on your torsion bars and adjust with your torsion bar clocking mechanism. You can also try dropped spindles but you have to be careful when buying wheels so you compensate for the added track width you will have. There are tons of articles on the RMS, HD and even Magnum Farce systems here so you can learn from others mistakes for free.:cheers: