How much power from intake swap?

Ok, so we finally got this 470 back on the dyno and its all done and ready to rock for this season.

I did NOT run the Victor intake, as the flow was way under what the heads flow. So we ran the single dom carb T/R. It ran good. All we did is have the heads worked over by the LaRoy guys, gained 30+cfm at the higher lift(.650+). Compression was a bit lower from the chamber work. Same cam and bottom end. Same 1050 carb. ADD the MW T/R intake.

Went from 731HP@6750rpm to 793HP@7300rpm

It did exactly what we hoped it would. Raise the power and the power band.

[ame]http://youtu.be/mPNcCWyld9w[/ame]