70 Duster Eagle Hemi Swap, No Spark!

So a little backround info on my 70 Duster project. I installed a new control freaks front suspension with a 5.7l Hemi out of a 2012 Ram. I used the origional PCM and Harness from the truck as well I used the cars origional 904 Trans.
All are bolted up and in place, fitment is good, but here comes my issue. I have the PCM wired and communicating with my mentor as well as HP tuners. I have fuel pump relay control from the PCM, ASD relay control from the PCM, injector pulse at each injector, but for some reason I have no PCM ground on any of the coils. I am hot on the BR/WT ASD wire, nothing on the ground side. Not sure why I would have no coil ground but yet have injector pulse...... Please Help!!!!