MSD brain teaser

12V at the white? I'd have to look this up, but I DON'T THINK SO

White is for breaker points.

What do you mean "the two old distributor wires?"

You talking about the existing Mopar distributor? They have to be wired to trigger the MSD

http://www.msdignition.com/WorkArea/DownloadAsset.aspx?id=15032386165

HEAVY BLACK........ground

HEAVY RED.............continuous 12V

SMALL RED.............switched 12v IE "ignition run."

ORANGE............Coil POS

BLACK................Coil NEG

NOTICE ONLY THOSE TWO WIRES AND NOTHING ELSE should be connected to the coil. DO NOT connect a tach to the coil!!!!

WHITE.........tape off and DO NOT GROUND. This is for points trigger

VIOLET and

GREEN These are the magnetic trigger IE factory Mopar distirbutor

Re read the destructions carefully. To test spark using magnetic trigger short and "unshort" the green and violet.

"or" repeatedly short / unshort the white to ground.

THE WHITE MUST be taped off when in operation