73Duster chassis is up and running

injected on methanol. Really is a great combo. But your going to have to rethink some things. Like a bigger pill will lean it out. Not knowing what went wrong I can't offer my opinion. But I will ask, did it milk up the oil? Did it warm up? What temp on the line? At the stripe? On initial startup,did it take a long time to build heat? You can easily burn 1gallon of fuel just warming up. Next time lean it out with the fuel shutoff. Saves fuel and wear and tear. Did you crack the throttle when turning it over to start it? Like you would with a Carb. Foot off the throttle when starting. No throttle until the engine is idling. Contact ron's. They will probably suggest sending in the entire system for a check up. And you need to know what your fuel pump flows. Your tune will be based off your pump. What kind of plug you run? How did it look? You wont foul a plug with methanol. So you got to read them differently. A good plug is ngk r5671a-10. Goggle "reading plugs 101" by Mike canter. Hey,your setup is a good one and will put a huge grin on your face. Just got to adjust some thinking there. And if you knew this stuff already,forgive my enthusiasum. Just trying to help.