[FOR SALE] Last chance 1967-1969 barracuda fender, door, mirror, etc. + misc. A body parts

-
Status
Not open for further replies.

fbcuda69

Well-Known Member
Joined
Jun 19, 2011
Messages
89
Reaction score
1
Location
Michigan
Rating - 100%
2   0   0
Contact seller
LAST CHANCE ON PARTS I STILL HAVE REMAINING. RE-LISTING ITEMS ONE MORE TIME AND WILL WAIT ABOUT ANOTHER WEEK TO SEE IF ANYTHING SELLS.

PARTS THAT ARE STILL AVAILABLE FROM LAST POSTING.

PACKAGE DEAL 1: IF SOMEONE BUYS THE DOOR AND FENDER, WAS $60; LAST CHANCE NOW 40 FOR BOTH. LOCAL PICKUP ONLY.

PACKAGE DEAL 2: IF SOMEONE BUYS THE WHOLE LOT OF WHAT I HAVE LEFT LISTED, WOULD SELL FOR WAS $125, LAST CHANCE NOW $100 (PARTS PRICED SEPARATELY COMES OUT TO $200); LOCAL PICKUP ONLY


I can only put a maximum of 12 pictures up, so I can only show most items. I can show more images of these items (Pleaseeee. serious only) if needed. I can also send pictures of any of the other items not shown; please give me an email address with the item(s) of interest and I will forward you a picture or two. Thank you!

Bigger items such as the door, etc. I will not ship and are available locally to pick up. U.S. only shipping (might open up to Canada in near future if parts still available) and buyer is responsible for all shipping, handling, insurance costs etc.

PARTS THAT WILL WORK ON A/B BODY CARS IN ADDITION TO 67-69 BARRACUDA'S:

1. Mopar original fuse box. Please note: 4 metal end clips that hold one side of the fuse are gone; just need to have to set in place. $10; NOW $5

2. A body A-arms that were blasted a while ago, a little surface rust. From what I recall, the drivers side thread is stripped, which is unfortunately common scenario with mopar A-arms, passenger side was okay. Some guys will weld the ball joints in place anyways as added protection, but I ended up getting a different pair. NOW $5


1967-1969 BARRACUDA SPECIFIC PARTS:

A. 67-68 passenger side door with vent window and crank mechanism. Overall very solid door with no major dings and dents on outside that I can see; I did sand the bottom lip area of the door where surface rust was and for the most part it is solid, however on one corner there is a spot about the size of a nickel that you can observe. Also, one area on the inside top section of door has a number of tiny pin size bumps (almost like someone worked on pounding a small dent out from the inside). I have both before and after pics of lower door and a picture of interior section described for reference. $35; LAST CHANCE GET OUT OF MY GARAGE SPECIAL $20; OTHERWISE GOING TO SCRAP METAL AND WILL TAKE WHATEVER $ THEY WILL GIVE. (local pickup only)

B. Part of 67-69 passenger fender. The front of the fender is set up for 1968, but could be adjusted for 67- or 69. The front half of the fender section is in very nice condition and is solid all around. This is and ideal candidate to mate a front and back section together to make very nice steel fender, which you barracuda guys know is almost impossible to find. Please note I am willing to cut the fender in half (not to specific measurements please) and possibly ship the nice section out. $65; WAS $45. NOW... LAST CHANCE GET OUT OF MY GARAGE SPECIAL $30; OTHERWISE WILL CUT FENDER IN HALF AND LIST GOOD HALF ON EBAY. (local pickup only)

C. 2 passenger side clear glass door windows,1 drivers side clear glass door window, 1 passenger side vent window. Drivers side window is designed for a 69 because it has a hole in the bottom designed for a door stop. 2 passenger windows do not have door stop hole, so will work for 67-68. The three glass pieces are in good driver condition, but none are perfect if your looking for show quality. The vent window is in the poorest condition, with some major finger nail scratches; this is a candidate for someone that is experienced in buffing out glass or just needs one for very cheap. NOW $10 each, vent window $5. Also have two dark tinted vent windows, $10 for both. LAST CHANCE ON ANY OF GLASS OTHERWISE SOME WILL BE LISTED ON EBAY.

D. 69 Taillight bezels/housings. Driver's side has a lot of the typical pot metal pitting, passenger side is in much better shape in this regard, but still has peppering throughout. Passenger side would look okay on a driver, but ideally both would best as cores for re-chroming. NOW $20; LAST CHANCE, OTHERWISE GOING ON EBAY!

E. Side/rear view round mirror. Mirror is structurally solid and the front/side area of chrome is in pretty nice shape. The back side of the chrome does have a few pitted areas however. This is a remote style mirror. NOW $15; LAST CHANCE $10, OTHERWISE GOING ON EBAY!

F. Inner chrome pieces/bezels for 1969 Barracuda front park lights. These goes in the middle of the lens area. (lenses not included) $20; LAST CHANCE $15, OTHERWISE GOING ON EBAY!

G. Passenger's side window trim piece. This is the chrome/stainless piece that fits on the end of the passenger door window and transitions to the back side window. Not show quality, but in nice shape overall. $10; NOW $5

H. Inside driver's door latch mechanism and interior door spring loaded handle with clip. Latch mechanism would need through cleaning/degreasing and lubrication. Interior handle mechanism is spring loaded part that opens either drivers or passenger's door from inside and is in normal used condition. $10; NOW $5 latch, $5 spring handle; LAST CHANCE $5 FOR BOTH!

Key words: cuda, challenger, super bee, scamp, demon, charger, road runner, dodge, plymouth, chrysler
Attached Images
 

Attachments

  • parts6.jpg
    51.6 KB · Views: 1,149
  • afterdoor1.jpg
    59.4 KB · Views: 1,133
  • parts7.jpg
    69.8 KB · Views: 1,121
  • parts12.jpg
    74.9 KB · Views: 1,102
  • fender2.jpg
    75.9 KB · Views: 1,099
  • tailbezel1.jpg
    78 KB · Views: 1,090
  • mirror1.jpg
    108.7 KB · Views: 1,056
  • mirror4.jpg
    130.6 KB · Views: 1,000
  • innerparkchrome.jpg
    98.1 KB · Views: 1,010
  • aarms.jpg
    79.6 KB · Views: 1,023
Question was asked whether fender was still available? Yes, but I am not going to cut just a tiny/small section out of the fender unless it's in the bad half of the fender. I am willing to cut the fender in half or at the very least the front section of the fender with the headlight bucket. Thanks
 
Hello. I'm interested of the rear lights frames. If if you still got them.
Thanks Daniel
 
I'll take the remote mirror at $10 plus mailing cost, if it still. available. Please PM me. I'll respond as soon as I have a chance to get back to the computer.

Thnx,
Mike in FL
 
Status
Not open for further replies.
-
Back
Top