360 build ????s

If you have the 484 cam and want to run it, go for it. The cam works pretty good and can easily put a combo in the 12's even high 11's without issue. Depending on compression ratio, advance the installed centerline as far as 100-102 area. DO NOT use the 114LSA 484 camshaft.

The torker II isn't my favorite intake, prefer and Air Gap/RPM/LD340. 4 Speed will cover a lot of the ills. If it was an older torker 340, straight to the smelter!

I'd put a 750DP on it. Plenty of carb to run hard.

Don't get caught up in the x or J head stuff. The heads from 68-76 are essentially the same with minor variances. If the heads you have are ported, did you get a flow sheet?