hi, did you moly lube pushrods also? I never use grease in an engine. if you moly lubed the rockers, then oil can't get out to rockers and pushrods. I seen a hemi, engine did same and cooked 4 sets of pushrods.
Fair enough. So just heavy duty engine oil? How to fill the rocker shafts with oil without turning the cam to just the right clock position? Or should I find the cam clock position vs crankshaft clock position to allow oil to each rocker shaft while pre-oiling?
Moper - I will replace the pushrods and rocker arm adjusters. I will do another pre-oiling check to see if the lifters feed oil up the pushrods during preoil...If not I may ditch the hollow pushrod feature.
thanks.
