Fuel Vaporization Using Eddy Carb -- In-Line Fuel Pump Question

Double check your float level and fuel pressure. If you have more than 5.5 psi at the carb (or so), it won't like it. Float level should be at 7/16".

If it does boil over hot, slowly push the accelerator to the floor and then crank the engine until it fires. It will save your starter by unloading the choke and clearing out the overly rich mixture faster. Edelbrocks seem to be known for tougher hot starts, but modern gas doesn't help any. I think you should expect a little bit of hard hot starting these days; all of my cars do that now to some extent.