My rb20de-t 64 barracuda

I ran a fused wire from the ignition switch to the couple of wires the engine harness needs to power up the ecu. I am probably going to make a switch panel and run everything off toggle switches. Starter will probably be a push button start. I used the stock Nissan skyline engine harness and the stock 64 Cuda harness. I am running an auto on this one. The engine and trans only had 35,000 kilometers on it which translates to roughly 19k. The rb20det Camaro will either be awd 5spd or I will convert the transfer case to rwd only.