Camshaft dillema

What i just posted is measured. It required me to use 2 dial indicators. Took measurment of lift with 1.5 rocker, used an adjustable pushrod to get max lift with 1.5 ratio rocker, took measurments at .050 lifter rise and .200. and marked degree wheel, also took measurments at the retainer for both ratios. The higher ratio had slightly different VO and VC #s (not actual openeing and closing of the valve but .050 and .200 #s) not much like I said. I graphed everything out on paper and turned both into lobe profile graph. It doesnt make the cam any bigger but it did change the events seen by the valve slightly. I really wish I had one of these.