Engine assembly tips

leaning towards this cam from hughes:
254/260 @.050
.600/.615 lift with 1.5 rockers on a 108 centerline installed at 104

That's a big cam, when i talked to hughes they were lining me up with a better cam for my combo. I have a 512ci. Not sure of your intentions, but they sure are helpful. If that's what they recommended, please disregard .Oh, and as said before. clean, measure and clean ! I like to check the bearings torqued down before the crank is in it with a bore gage. It tells me if it's good to go. C300