My HDK install thread.
well guys i know this doesn't directly pertain to the HDK install but here is last nights progress. I am installing a trans temp. gauge in the car so i needed an inline temp sending unit manifold. I got mine from autometer. the directions say it needs to be on the pressure side of the trans lines and as close to the trans as possible so i ended up putting it against the driver side inner fender. here is the pics.
I used a 45* fitting off the trans and a 90* off the manifold to point the line up against the floor and around the headers. this gave me about 4-5" of clearance all way around.
then i started running my lines back to the coolers.
well guys i know this doesn't directly pertain to the HDK install but here is last nights progress. I am installing a trans temp. gauge in the car so i needed an inline temp sending unit manifold. I got mine from autometer. the directions say it needs to be on the pressure side of the trans lines and as close to the trans as possible so i ended up putting it against the driver side inner fender. here is the pics.
I used a 45* fitting off the trans and a 90* off the manifold to point the line up against the floor and around the headers. this gave me about 4-5" of clearance all way around.
then i started running my lines back to the coolers.
