727 question

downsr said

I have adjusted the bands increased line pressure and it still shifts soft and a slip before going into 3.I also have adjusted kick down with no change.I replaced the converter and all this started.Can a faulty converter cause this .Its like the line pressure is to low.of course the
torque converter company says it will not.

Click to expand...

The torque converter cannot change the line pressure. The lugs on the converter are what drives the pump. There's no way to modify lugs. If the line pressure was low it'd affect the 1-2 shift also. How did you adjust the band (what method)?

If you had a stock or near stock stall converter in it before and you went to a pretty loose converter such as a 3000 stall or higher it will soften the shifts a little, but it won't cause the trans to flare up like your describing