My Quickjack made it and we're pleased to say it works just fine.
A little small on the rubber blocks but they do the job. I'll be making some pad height extensions from some 2" X 3" tube stock that's laying around.
A couple nuisance quality issues (see pictures) included bolt holes for the pump mounting off location and the repair (as delivered) questionable.
The 3/8"-16 X 1" pump mount bolts were too short for my liking as washers were needed for the oversize "repaired or relocated slots".
NAPA was kind enough to throw two 1-1/4" bolts in with my two quart trans fluid purchase.
The solenoid DIN plug came broken. Screw was probably over torqued when assembled. No big deal.
