Need advice on Brake line parts and configuration

abodyjoe said
Use the two piece line you already have (cheaper that way). Just put a Flare union in. Had the same issue and that's what fine lines sent us.

http://shop.advanceautoparts.com/p/...-16-3-8-24-inverted-1-card-blu-3c/22190079-P#

Thanks Joe...
Do you recall the fitting sizes on the short section of the 2pc. rear you received from fine lines? Mine came with a 3/16 fitting on one end and a 1/4 on the other. The port on the block is tapped for the 3/16 end which means the 1/4 end has to join with the long section..

The Long section has a 3/16 fitting on it so the union would have to be 3/16 x 1/4 to join the sections.

Was this the same for you?

AlV