Carter 2BBL carb- I am stuck

I used the gauge that came in the rebuild kit and specs I saw online. But the fuel in the bowl was practically empty. So I set it to what I thought looked good.

The bowl is about 50-60% full.

I know I am guessing and not necessarily an educated guess. I can always readjust it later

Ok, I just went out and relooked at the adjustment I made. If memory serves, the instructions I saw said to hold the carb upside down and measurer how far the floats were from the top of the carb, I think it said 1/4". I just went and checked the level in the carb, but not held upside down and the floats are just about where I set them upside down (give or take a couple 16th of an inch)