Street / Strip 72 Swinger
thanks- Dartn440
Tqfastfish-kept the spare tire well, can put- jumper cables ect. in there
the tank sets on a section of 1/2" plywood, the size of the tank
the plywood sets level to the trunk floor, with 2- 1" x 1/2" U channel steel
spaced and welded to the floor
same as used on the top,
the top also has a strip of plywood inserted into the U channel
to keep from scratching the tank
there is a PVC wedge, mounted into the trunk lock area, to keep the tank from shifting rearward.
the pump is mounted below the tank, but in front, cause i wanted the tank as far back as possible.
the round hole to the right, is just a patch panel i haven't finished in the pic, it is now been welded in
the red cap on the front right is for the fuel return> haven't ran fuel lines yet
I still have to build a spare tire mount to go in front of the fuel cell, there is room
thanks- Dartn440
Tqfastfish-kept the spare tire well, can put- jumper cables ect. in there
the tank sets on a section of 1/2" plywood, the size of the tank
the plywood sets level to the trunk floor, with 2- 1" x 1/2" U channel steel
spaced and welded to the floor
same as used on the top,
the top also has a strip of plywood inserted into the U channel
to keep from scratching the tank
there is a PVC wedge, mounted into the trunk lock area, to keep the tank from shifting rearward.
the pump is mounted below the tank, but in front, cause i wanted the tank as far back as possible.
the round hole to the right, is just a patch panel i haven't finished in the pic, it is now been welded in
the red cap on the front right is for the fuel return> haven't ran fuel lines yet
I still have to build a spare tire mount to go in front of the fuel cell, there is room
