ELEC--temp and fuel gauge out!! Help

Richard Ehrenberg did a very good article over at

http://www.allpar.com/history/mopar/electrical2.html

I converted my internal to an external when it wasn't working. The gas gauge is off about 1/4 so eventually I'll have it rebuilt. My factory temp gauge works fine but I also have an aftermarket temp gauge.

Here's a pic during my external regulator installation. In this picture, two of the leads are reversed. Pete In NH, a member here, helped me find it. Probably best to use black for ground, D'oh#-o (and I even have plenty of black wire!) It's difficult to see but the regulator is mounted on a heat sink on the right.

Just follow Richard's info and you'll be fine.