How to remove outer wheelhouse?

Evening Rod,
I'm in the middle of doing my Dart quarters with outer wheel wells and trunk drops right now. If you check out page 3 and 4 you can see how I'm installing my wheel wells which also is the same way they install them at the AMD installation centre. You will be cutting the tub right along the tubs flange and leaving the old flange in place then drilling the spot welds that hold the roof brace to the tub, you can drill those ones right thru since the tub will be garbage any how. The spot weld that hold the multiple layers of panels together up front will need to be drilled carefully so that you leave the inner most panel not drilled thru since your going to plug weld to that panel building and filling the holes all the way back to the surface panel. There are 5 or 6 spot welds on the inside of the sail panel under the package tray that need to be drilled from the inside, pretty awkward spot so I used a long drill extension and took my time because you want to not drill those all the way thru just the inner layer or two that will allow the roof brace free from the tubs existing flange so that you can slide the tub up in between the layers, the new tubs flange will sit nicely on top of the old flange. You will need to grind the old flange's edge nice and flat after cutting the old tub out. I don't know which A-body your doing but the method should be similar on the others. Let me know if you need any other pictures or any questions I can answer feel free to ask.

Danny

http://www.forabodiesonly.com/mopar/showthread.php?t=315358